48RE OEM Reference

OEM 52854001AA 48RE Governor Pressure Solenoid: Symptoms, Specs & Install

If you searched for 52854001AA, this is the part. 48RE Governor Pressure Solenoid for the 48RE. Below: failure symptoms, electrical specs, install procedure.

In stock and ships same day

48RE Governor Pressure Solenoid (OE# 52854001AA) — direct-from-the-pro pricing on gearboxinsider.com. Free shipping over $75. 30-day returns.

Order at Gearbox Insider →See related kits

What it does

Sets governor pressure that controls 48RE shift timing. The single most-replaced part on the 48RE.

Fitment

2003-2007 Dodge Ram 2500/3500 Cummins with 48RE.

Common failure symptoms

Erratic shift points, harsh 1-2 shift, 3-4 flare, no overdrive lockup

Electrical specs

Pulse-width modulated solenoid.
Sonnax HD versions available for tow rigs.

Run a resistance check before condemning the solenoid. Bad wiring, corroded harness pins, or a failing PCM driver can cause identical symptoms.

Replacement procedure

  1. Drop pan (smaller than 68RFE — easier job)
  2. Locate governor solenoid on the valve body driver side
  3. Disconnect 2-pin harness
  4. Remove 10mm retaining bolt
  5. Pull solenoid straight out
  6. Lubricate O-rings with fresh ATF+4
  7. Torque bolt to 12 ft-lbs
  8. Refill — 48RE takes 6-7 quarts on pan drop

Ready to order 52854001AA?

Skip the parts-store counterman. 48RE Governor Pressure Solenoid ships same-day from gearboxinsider.com.

Order 52854001AA →

Related on Gearbox Insider

48RE rebuild parts guideShop by symptomAll transmission parts

Get the next diagnostic write-up in your inbox

No spam, no sales pitch. Real shop-floor diagnostics, fluid spec updates, and the occasional tool recommendation.

Join the newsletter