Most Common 68RFE Failure Codes
The 68RFE from Chrysler/RAM has well-documented failure patterns. Most issues come down to one of the following codes or symptoms. Pull the code, find the row, fix the unit.
| Code / Symptom | What's Happening | What to Replace First |
|---|---|---|
| P0731 | 1st gear ratio incorrect | Underdrive solenoid + UD clutch. |
| P0871/0876 | OD/UD pressure switch | Solenoid pack assembly. |
| Harsh 1-2 | Pressure switch + valve body | Inspect pressure switch + sleeve PR valve. |
| Slip under load | Heavy-duty rebuild needed | HD clutch packs + valve body upgrade. |
Free PDF: Solenoid Diagnostic Cheat Sheet
Every common solenoid code for the 68RFE family + 5 other transmission families. Print-ready reference for your bench.
Get the Free Cheat SheetDiagnostic Workflow
Before condemning any solenoid or component on the 68RFE, work through these steps in order:
- Pull the pan and inspect fluid. Burnt or dark ATF+4 = clutch failure, not just solenoid. Document with photos.
- Drain-and-fill with ATF+4. Wrong fluid in this unit causes most "solenoid" complaints. Always rule fluid out first.
- Pull codes with a bidirectional scan tool. A generic OBD2 reader won't actuate the solenoids - you need TCM access for live data.
- Test solenoid resistance cold. Out of spec = electrical failure. In spec = look at hydraulic side (valve body).
- Pressure test on the lift. Low line pressure even with new EPC = pump or valve body wear.
- Bench-test valve body. Air-test plate kit catches cross-leaks invisible to scan tools.
Free PDF: 25-Point Comeback Prevention Checklist
The teardown inspection that stops rebuilds from coming back. Used by shops doing 20+ rebuilds a month.
Get the Free ChecklistGet The Chrysler/RAM 68RFE Tip Sheet By Email
One email a week with diagnostic shortcuts, parts callouts, and shop-direct deals on the tools you actually use. No fluff.
No spam. Unsubscribe anytime.
68RFE Service Recommendations
The 68RFE responds to maintenance the way most modern automatics do - well-maintained units run 250k+ miles, neglected units fail at 100k. Recommend to your customers:
- Drain-and-fill with ATF+4 every 30,000 miles
- Full filter and pan-gasket service every 60,000 miles
- Auxiliary cooler if towing or in hot climates
- Don't ignore early shudder - catch fluid issues at the first symptom, not the third
- Document every service with fluid sample and date