Home / Shop / Hard Parts / Four Seasons 53001 Ultra-Cool Universal Transmission Oil Cooler 12.5 x 7.5 in
Hard Parts

Four Seasons 53001 Ultra-Cool Universal Transmission Oil Cooler 12.5 x 7.5 in

$83.99
Ships from the USA

Universal add-on plate-and-fin ATF cooler, 12.5 by 7.5 inches, with 3/8 inch push-on fittings and hardware to cut transmission heat on tow rigs and CVTs.

Secure Stripe checkout • ships from the USA • free shipping over $100

About this product

Heat is the number one thing that kills an automatic. Once the fluid climbs much past 200 degrees the friction material and seals start to give up, and towing, hills, and stop-and-go traffic all drive temperature up in a hurry. The Four Seasons 53001 is an auxiliary cooler you add ahead of the radiator or A/C condenser to pull that heat back out of the fluid before it cooks the clutches and turns the ATF dark.

This is the Ultra-Cool plate-and-fin core, measuring 12.5 by 7.5 by 0.75 inches, so it fits into a tight nose where a bigger stacked-plate unit will not. It plumbs inline on the transmission cooler return line and works just as well as an add-on power steering cooler. It has become a popular fix on CVT-equipped cars like the Nissan Altima, Rogue, and Murano, which run undersized factory coolers and are very sensitive to fluid temperature, but the universal design fits any rig where you want lower trans temps and longer fluid life.

Four Seasons is the SMP Temperature Control brand, so the aluminum core is tested and pressure-checked before it ships. The kit includes the cooler, hose, foam isolation pads, and nylon mounting straps to secure it to the radiator or condenser. Fittings are 3/8 inch push-on barbs. On some vehicles you may want an extra foot of cooler hose and a vehicle-specific line adapter, and you should top off the fluid with the engine running after install since the cooler and hoses hold roughly a half quart. Universal add-on unit, not a direct OE replacement. Ships from the USA.


Specifications

Part number53001 (Four Seasons / SMP)
Core size12.5 in L x 7.5 in W x 0.75 in H, approx 1.95 lbs
Core typePlate and fin aluminum, universal add-on (not a direct OE replacement)
Fittings3/8 in push-on hose barbs
In the boxCooler, hose, foam isolation pads, nylon mounting straps and hardware
Common usesAuxiliary ATF cooler, CVT cooling, tow and haul, power steering cooler

Related products
Dana 60/61 Rear Differential Master Overhaul Kit (ZK D60-R)
Hard Parts
Dana 60/61 Rear Differential Master Overhaul Kit (ZK D60-R)
$199.99
View
GM SM465 4-Speed Manual Transmission Bearing & Synchro Kit
Rebuild Kits
GM SM465 4-Speed Manual Transmission Bearing & Synchro Kit
$259.99
View
B&M 80775 Unimatic Automatic Shifter, Universal 3/4 Speed
Hard Parts
B&M 80775 Unimatic Automatic Shifter, Universal 3/4 Speed
$479.99
View

Get the next diagnostic write-up in your inbox

No spam, no sales pitch. Real shop-floor diagnostics, fluid spec updates, and the occasional tool recommendation.

Join the newsletter