1.5-liter twist-valve syringe that extracts and dispenses ATF, gear oil, and brake fluid for sealed transmission, differential, and transfer case fills.
The Mityvac MVA6852 is a manual, syringe-action fluid extractor and dispenser with a 1.5-liter (1500 ml) reservoir. You pull the plunger to draw fluid in, twist the valve on the hose to lock it closed so nothing drips on the way to the fill hole, then push the plunger to dispense a measured amount. It is the tool that makes sealed-for-life transmission, differential, and transfer case services actually doable on the bench or under the car without a lift-mounted machine.
Where it earns its keep is on modern sealed transmissions that have no dipstick and fill from the side through a check plug: Toyota/Lexus units, Honda and Acura differentials that take Dual Pump fluid, CVTs, and any gearbox where you have to push fluid uphill into the case. It also handles power steering reservoirs, brake and clutch master cylinders, coolant bottles, and diesel fuel filter housings. The dual-seal piston keeps suction and dispensing consistent so you are not fighting the plunger.
It ships with the MVA7218 rubber ATF adapter, which also lets it connect to the adapters in the Mityvac MVA5800 ATF refill kit for hard-to-reach GM and import fill ports. The wide plunger opening wipes clean with a shop rag, and the clear body lets you read the exact volume going in so a drain-and-fill actually goes back in at spec.
| Brand | |
| Model | |
| Capacity | |
| Action | |
| Piston | |
| Material | |
| Included adapter | |
| Typical uses |
