Clutch Masters 90-96 Nissan 300Z / 300ZX FX250 Sprung Heavy Duty Clutch Kit
Clutch Masters 06045-HD0F is the FX250 heavy-duty clutch for the 1990-1996 Nissan 300ZX with the 3.0L non-turbo engine, and it shares its pattern with push-type RB20, RB25 and RB26 Skylines. It is the kit for a driver whose original clutch is slipping or worn out and who wants extra holding power for spirited driving and the odd weekend event, without the harsh engagement of a ceramic race disc.
The FX250 uses the Power Plus I heavy-duty pressure plate with a hybrid disc: Fiber-Tough friction material faces the pressure plate and steel-backed organic material faces the flywheel. Clutch Masters rates it at a 110 percent increase in holding capacity and says it holds more than a traditional full-face Kevlar disc while keeping the street manners of its milder FX100 and FX200 kits. A marcel spring wafer between the linings and a sprung hub soften engagement, so it behaves like a firm stock clutch in traffic.
The kit includes the pressure plate, the hybrid disc, a release bearing, a pilot bearing where applicable, an alignment tool and an instruction card. It ships at 20 lb and does not include a flywheel.
On a car this age, check the hydraulics before condemning the disc. A tired master or slave cylinder or air in the line can cause both slip and incomplete release. Bleed the system, then look for oil from the rear main seal or transmission input seal at the bellhousing. A low-rpm, full-load pull in a high gear will show slip on the tach. The full test is in our slipping diagnosis guide, and flare versus slip explains how to read what you see.
Clutch Masters lists 06045-HD0F for:
The twin-turbo 300ZX is a different application and uses the 06046 series. RB fitment is push-type only. Swaps and replaced transmissions are common on these cars, so confirm the engine, gearbox and flywheel before ordering, or send us your year and VIN and we will check.
Need more clamp for a boosted car? The FX350 06045-HDFF is the next step up. For job budgeting, see our repair cost comparison.
| Brand | Clutch Masters |
| Part number | 06045-HD0F |
| Fits | Clutch Masters 90-96 Nissan 300Z / 300ZX FX250 Sprung Heavy Duty Clutch Kit |
| Vehicle fitment | Nissan 300Z / 300Zx Fx250 (1990-1996) |
| Type | Clutch Kits - Single |
| Condition | New |
| Ships | Same business day (in stock), from the USA |
| Warranty | 1-year |
No. 06045-HD0F is listed for the 1990-1996 300ZX 3.0L non-turbo from 2/89 production. The twin-turbo car uses a separate 06046 series kit.
Clutch Masters lists the 1989-1993 RB20DET and 1989-1998 RB25DET and RB26DETT with push-style release. Pull-type RB gearboxes need a different kit.
It has a marcel wafer and organic flywheel-side lining, so it engages much like a firm stock clutch while holding more torque. It is not a chattery race disc.
No. The kit has the pressure plate, disc, release bearing, pilot bearing where applicable and an alignment tool. Resurface your flywheel or replace it.
The clutch hydraulics use brake fluid; use the grade printed on the reservoir cap and bleed the system after the install.
