Launch Creader Elite 3.0 Chrysler Bidirectional Scan Tool

This Launch Creader Elite 3.0 is the Chrysler software version, covering Chrysler, Dodge, Jeep and Ram. It reads every module the vehicle reports, not only the engine: transmission control module (TCM), ECM, ABS, body control, steering angle and more. You can read and clear codes in each module, pull freeze frame, and watch live data as text or graphs.

For transmission work that matters on a 62TE, 45RFE, 545RFE, 68RFE or 8HP-equipped Chrysler product: a generic reader only sees the P07xx codes, while this tool reads the TCM directly and shows the live data you need to see line pressure, solenoid states and gear ratio as the unit shifts. The reset menu includes gear learning (quick learn where supported) and throttle relearn, which is often required after a valve body, solenoid pack or transmission replacement. Functions vary by model and year, so confirm your vehicle in the Launch coverage list first.

Bidirectional (active) tests let you command outputs from the tool and confirm a component responds before you replace it. Other service functions include oil reset, EPB, SAS, battery registration, ABS bleeding, injector coding, air suspension and DPF regeneration where the vehicle supports them.

It still covers generic OBD2 on 1996-up vehicles with all ten modes, and supports CAN-FD and DoIP. Hardware is a handheld with Android 8.1, 2GB RAM, 64GB storage, a 3000mAh battery and a detachable USB cable. Updates are free over Wi-Fi.