Clutch Masters 11-14 Nissan Juke 1.6T 6-Speed FX100 Clutch Kit
The Clutch Masters 06178-HD00-XH is an FX100 street clutch kit for the six-speed manual Nissan Juke with the 1.6L turbo. Juke owners shop for it when the factory clutch starts slipping in third or fourth under boost, after an intake, exhaust or tune has pushed torque past what the stock disc will hold, or when the release bearing starts to chirp. The XH kit includes a new hydraulic release bearing, so the parts that usually wear out together get replaced together.
The pressure plate clamps the disc against the flywheel so engine torque reaches the gearbox. On this car, release is handled by a hydraulic bearing that sits around the input shaft inside the bellhousing, which is why it makes sense to replace it any time the transmission is out. The FX100 uses Clutch Masters' Power Plus I heavy-duty pressure plate with a steel-backed organic disc and a Marcel spring wafer. Clutch Masters rates it at 70 percent more holding capacity than stock and aims it at cars with light bolt-ons, with only slightly firmer pedal and smooth, normal engagement.
Try a top-gear roll-on at low rpm: if revs rise faster than road speed, the disc is slipping, and our flare vs. slip guide explains how to tell real slip from a brief rev rise. Low or soft pedal problems are often hydraulic rather than the clutch itself, so bleed and inspect the system first with our hydraulic clutch bleeding guide. Our clutch slipping symptoms guide walks through oil contamination and other causes. Most Jukes left the factory with a CVT; if yours is an automatic, start with our Nissan Juke transmission problems page instead.
Our listing covers the 2011-2014 Nissan Juke 1.6L turbo with the six-speed manual. Clutch Masters' own application chart for 06178-HD00-XH runs wider: Juke 2011-2017 1.6L Turbo 6-speed and the 2016-2019 Sentra SR Turbo 6-speed. Check that your car has three pedals before ordering. If you have a 2015-2017 Juke or a Sentra SR Turbo, send us your year and VIN and we will confirm before it ships. See our other manual-drivetrain parts in the rebuild kits collection.
| Brand | Clutch Masters |
| Part number | 06178-HD00-XH |
| Fits | Clutch Masters 11-14 Nissan Juke 1.6T 6-Speed FX100 Clutch Kit |
| Vehicle fitment | Nissan Juke 1.6T 6-Speed Fx100 (2011-2014) |
| Type | Clutch Kits - Single |
| Condition | New |
| Ships | Same business day (in stock), from the USA |
| Warranty | 1-year |
No. It is for the 1.6L turbo with the six-speed manual. Cars with the CVT have no clutch to replace.
Yes. The XH kit includes the hydraulic release bearing, along with the pressure plate, disc and alignment tool.
Clutch Masters lists the 2011-2017 Juke 1.6T 6-speed and the 2016-2019 Sentra SR Turbo 6-speed. Our listing is titled 2011-2014, so send us your VIN and we will confirm.
Clutch Masters rates the FX100 at 70 percent more holding capacity than stock, for cars with intake, exhaust and similar bolt-ons.
Clutch Masters describes it as only slightly firmer than factory, with normal engagement feel.
Resurface it or replace it. A glazed or heat-checked face will make any new clutch chatter.
