Valvoline Multi-Vehicle Full Synthetic ATF, Case of 3 Gallons

This is a full case of Valvoline Multi-Vehicle full-synthetic automatic transmission fluid, three one-gallon jugs, 384 fluid ounces total. Buying the case is how you cover a real service: a pan drop and filter change on most passenger transmissions takes 4 to 6 quarts, and a full fluid exchange (thermal flush through the cooler lines) commonly takes 12 to 16 quarts, so a three-gallon case does the whole job with fluid left for the top-off.

Valvoline blends this as a single fluid that meets a long list of import and domestic specs, so it is the fluid you reach for when you do not want to stock ten different bottles. It carries approvals across common Dexron, Mercon, and many Japanese and European ATF requirements (always confirm the exact spec printed on your dipstick or in the owner's manual before you fill). The full-synthetic base holds its viscosity from cold starts to hot cooler temps, and the friction package is tuned to keep shifts crisp and quiet on high-mileage units.

It runs full-synthetic base oils with anti-wear additives to slow clutch and gear wear, plus seal conditioners that keep aging seals pliable to fight the weep you get on higher-mileage transmissions. Flash point is rated at 394 F. Use it for scheduled drain-and-fills, filter services, and complete flushes on cars, light trucks, SUVs, and vans. Ships from the USA.