Reads and clears Engine, ABS, SRS airbag, and transmission codes with live data graphing, plus oil, EPB, ABS bleed, SAS, and throttle resets.
Most cheap code readers only talk to the engine computer, so when the transmission acts up or an airbag or ABS light comes on you are still guessing. The NT614 Elite reads and clears fault codes on all four core systems - Engine, ABS, SRS airbag, and Transmission - so you can pull the actual stored code behind a check-engine or wrench light instead of throwing parts at it.
For a transmission diagnosis it matters that this tool reads live data as scrolling graphs. You can watch transmission fluid temperature, wheel speed sensors, engine load, RPM, fuel trims, and battery voltage in real time, which is how you catch an intermittent shift complaint, a slipping converter that only shows up hot, or a sensor that drops out under load. It runs AutoVIN to identify the vehicle and generates a health report you can save or hand to a customer.
Beyond reading codes it does five service resets DIYers actually use: Oil Service Reset, Electronic Parking Brake (EPB) service for rear-caliper brake jobs, ABS Bleeding to purge air after a hydraulic repair, Steering Angle Sensor (SAS) calibration, and Throttle Relearn. Setup is plug-and-play through the OBDII port with no separate power cord, and updates are free for life over Wi-Fi with no subscription. Coverage spans 90-plus makes and 10,000-plus models including Ford, GM, Toyota, Honda, Nissan, BMW, Mercedes-Benz, Volkswagen, Hyundai, and Subaru.
Note that available functions vary by make, model, year, and system - confirm your vehicle before relying on a specific reset. This is the same 4-system coverage as the popular NT604 with the added service resets and live-data graphing.
| Systems covered | |
| Service resets | |
| Live data | |
| Vehicle coverage | |
| Updates | |
| Model | |
| Connection |
