Camaro 1993-2002 Rear Driveshaft Assembly 936-611

This is a one-piece steel rear driveshaft for the fourth-generation F-body: 1993-2002 Chevrolet Camaro and Pontiac Firebird, rear-wheel drive. It replaces GM 12564000 and 12568188 and crosses to Dorman 936-611.

The rear shaft runs from the transmission slip yoke back to the rear axle pinion. A worn U-joint or an out-of-balance shaft shows up as a vibration that builds with road speed, a clunk when you let off the throttle, or a squeak when the car starts to roll. A slip yoke worn by a dry or leaking tailshaft seal can also clunk.

Overall length is 47.05 in., measured end to end, with a 27-spline slip yoke. Compare the length and yoke splines to your old shaft before install, and replace the transmission tailshaft seal while the shaft is out.