Dodge Challenger V6 Rear Driveshaft Assembly 2015-2019

This is the full two-piece rear driveshaft for the 3.6L V6 Challenger with rear-wheel drive and the 8-speed automatic. It comes assembled with the center support bearing, the u-joints and the flex-coupling flanges, ready to go in between the transmission output and the rear differential.

Fitment: 2015-2019 Dodge Challenger 3.6L V6 RWD with the automatic transmission. It replaces Mopar 52123974AC, 52123974AD, 52123974AE, 52123974AF, 52123974AG, 52123974AH, 52123974AI and 52123974AJ, and Dorman 976-987. It does not fit AWD Challengers or the V8 cars.

The usual reason to replace the whole shaft on these cars is a worn center support bearing. You hear a rumble or whine that rises with road speed, feel a vibration through the floor around 40-70 mph, or get a clunk when you shift into drive or reverse. The bearing is pressed into the shaft, so a complete assembly is often cheaper and faster than rebuilding the old one. Mark the rear flange, support the shaft, unbolt the center bearing bracket and both ends, then install the new shaft and torque the bolts to factory spec.