Dodge Charger AWD Front Driveshaft Assembly 68200149AD

This is the front driveshaft for the all-wheel-drive LX and LD cars: 2015-2021 Dodge Charger (3.6L V6 and 2015-2020 5.7L HEMI), 2017-2021 Challenger GT 3.6L, and 2015-2021 Chrysler 300 (3.6L, plus the 2020 5.7L). It replaces Mopar 68200149AD and 68200149AB and fits cars with the active transfer case and front axle disconnect.

On these cars the short front shaft runs from the transfer case to the front differential beside the oil pan. Worn joints show up as a clunk or shudder when the AWD system engages, usually on takeoff in rain or snow, and a vibration that changes with load rather than road speed. A dry joint left alone can let go and damage the transfer case output.

Both ends are four-bolt flanges, so the swap is bolts only: support the car, unbolt the transfer case end and the front diff end, and fit the new shaft. Check your old shaft length first: this one is 24.8 in. compressed and 26.77 in. extended.