Dodge Durango Transfer Case Control Module 68395074AA

This is the transfer case control module (TCCM) that runs the 2-speed transfer case on 2014-2015 Dodge Durango and 2014-2015 Jeep Grand Cherokee. It reads the 4WD mode selector and commands the shift motor to move the case between 4-High, 4-Low and neutral. It replaces Mopar 68395074AA, 05150732AE, 5150732AC, 5150732AD and 5150732AE.

Listed fitment: Durango with the 2-speed transfer case (3.0L diesel, 3.6L, 5.7L and 6.4L) and Grand Cherokee with the 2-speed transfer case (3.6L and 5.7L). Single-speed AWD cars do not use this module, so confirm you have a 4-Low position before ordering.

A failing TCCM usually shows up as a Service 4WD message, a case that will not shift into or out of 4-Low, neutral that will not engage for flat towing, or U-codes for lost communication with the module. Before replacing it, check the module power and ground circuits and the connectors for corrosion, and make sure the shift motor itself is not seized.

Bench notes: disconnect the battery, unplug the connectors, and swap the module. Match the old module part number to the new one. Depending on the vehicle, the new module may need to be programmed or configured with a scan tool that supports Chrysler modules before the case will shift.