Replacement pressure plate, disc, release and pilot bearing for the 2001-2005 Dodge Stratus and Chrysler Sebring coupe with the 3.0L V6 manual.
Clutch kit for the 3.0L V6 manual cars of 2001-2005: the Dodge Stratus and the Chrysler Sebring (the Mitsubishi-built coupe platform). It crosses to 05-139, 05-121, 52301406, 6233452000 and K70314-01.
Included: pressure plate (10-7/16 inches), clutch disc (9.06 inches, 23 splines, 4 damper springs), release bearing, pilot bearing and an alignment tool. The input shaft is 1 inch.
Typical reasons it comes out: the clutch slips on a hard pull, the pedal engages at the very top, or there is chatter pulling away from a stop. Also inspect the flywheel face and the release fork pivot while the transaxle is out; a worn pivot gives a notchy pedal even with a new clutch.
Resurface or replace the flywheel, fit the new pilot bearing, put a thin film of grease on the input splines and fork contact points, center the disc with the tool and tighten the pressure plate bolts evenly in a star pattern.
| Reference numbers | 05-139, 05-121, 52301406, 6233452000, K70314-01 |
| Fits | 2001-2005 Dodge Stratus 3.0L V6; 2001-2005 Chrysler Sebring 3.0L V6 (manual transmission) |
| Includes | Pressure plate, clutch disc, release bearing, pilot bearing, alignment tool |
| Pressure plate diameter | 10-7/16 in |
| Disc diameter | 9.06 in |
| Disc spline count | 23 |
| Input shaft diameter | 1.00 in |
