Replacement pressure plate, 11-inch disc and pilot bearing for 1999-2004 Ford Mustang 4.6L V8 manuals, including 2001 T45 and TR3650 cars.
Clutch kit for the 4.6L V8 manual Mustang: 1999, 2001 SOHC and DOHC (T45 or TR3650 transmission), and 2002-2004, plus the 2000 5.4L car. It crosses to 07-195 and 07-023.
In the kit: pressure plate, an 11.02-inch clutch disc, pilot bearing and an alignment tool. The disc is listed at 10 splines on a 1.08-inch input. A throwout bearing is not listed as included, so plan on one. Count the splines on your old disc and match it before the transmission goes back up; T45 and TR3650 cars are easy to mix up.
These usually come out for slipping at the top of 2nd and 3rd, chatter on launch, or a pedal that grabs high after years of hard use. With the trans out, resurface or replace the flywheel, check the clutch fork and pivot for wear, and inspect the cable and quadrant.
Drive in the new pilot bearing, lightly grease the input splines, center the disc with the tool and draw the pressure plate bolts down evenly in a star pattern.
| Reference numbers | 07-195, 07-023 |
| Fits | 1999 Ford Mustang 4.6L V8; 2001 Mustang 4.6L SOHC/DOHC (T45 or TR3650); 2002-2004 Mustang 4.6L V8; 2000 Mustang 5.4L V8 (manual transmission) |
| Includes | Pressure plate, clutch disc, pilot bearing, alignment tool |
| Disc diameter | 11.02 in |
| Disc spline count | 10 |
| Input shaft diameter | 1.08 in |
