Honda Accord 2003-2007 2.4L Manual Transmission Mount Kit

On the seventh-generation Accord 2.4L with the manual gearbox, the mounts on the transmission side take every clutch engagement. When they tear you feel a clunk as the clutch grabs, a lurch on and off the throttle, and a notchy or vague shifter because the gearbox is moving under the shift cables. A soaked or collapsed rear hydraulic mount adds idle vibration you feel through the seat and pedals.

This four-piece kit covers the rear engine mount (hydraulic), the left upper transmission mount, the front left transmission mount, and the rear left transmission mount for 2003-2007 Honda Accord L4 2.4L with the manual transmission only. Automatic cars use different transmission mounts and the V6 is a different engine layout, so check your gearbox before ordering. Cross references include A4516, A4542, A4594, A4596, EM9194, EM9225, EM9426, EM9438 and Honda 50810-SDA-A02, 50870-SDA-A02, 50850-SDA-A10, 50860-SDA-A12.

To check them, have a helper hold the brake with the engine running, then slowly let the clutch out in first and in reverse while you watch the engine from the fender. More than about half an inch of lift or rock means the mounts are done. Support the engine and gearbox from below with a jack and a wood block, change one mount at a time, and do the final torque with the car on its wheels so the rubber is not preloaded.