Honda Civic Sedan 2006-2011 1.8L Manual Trans Mount Kit 3-Piece

A three-piece mount set for the 2006-2011 Honda Civic sedan with the 1.8L four-cylinder and the 5-speed manual. It includes the front engine mount, the manual transmission mount with its mounting bracket, and the front upper engine torque strut mount. It crosses to A4530, A4546 and A4548 and replaces Honda numbers including 50820-SNA-033, 50820-SNB-305, 50850-SNA-A01 and 50880-SNA-A02.

A worn transmission mount on the manual Civic shows up as a jerk and clunk on clutch engagement, shift lever movement under load and a buzz through the cabin at idle. Drivers often suspect the clutch or the synchros when the gearbox is just moving around on a torn mount. Replacing the transmission mount together with the engine mount and upper strut keeps the driveline aligned so the new clutch and shifter feel right.

Sedan with manual transmission only. The coupe and the automatic cars use different mounts.

On the job: support the engine from above or with a jack and a block of wood under the oil pan before any mount comes out. Change one mount at a time, leave the through-bolts snug until every mount in the set is in, then let the drivetrain settle at rest and torque everything. Tightening a mount while the engine is jacked sideways preloads the rubber, and a preloaded mount tears early.