Honda Odyssey 2008-2010 Engine and Transmission Mount Kit

Odyssey mounts take a beating, and on the 2008-2010 vans a failed mount shows up as a heavy vibration at idle in drive, a clunk when shifting between drive and reverse, and a shake at highway cruise. Replacing only the obviously torn mount usually leaves the others overloaded, which is why this set covers all five.

The kit includes the front engine mount, the front right engine mount, the rear engine mount, and both the front and rear transmission mounts. It fits the 2008-2010 Honda Odyssey LX, EX, and DX, and the 2010 NHL SE, with the 3.5L V6 automatic and the VTEC engine. It does NOT fit the EX-L or Touring, which use the J35A7 engine with variable cylinder management and different active mounts. Cross references include A4587, A4557, A4553, A4558, A65023HY and Honda 50820-TK8-A61, 50810-SHJ-A00, 50721-S5C-013.

Confirm your trim before ordering. Support the engine and transmission from below, replace one mount at a time, and torque the through-bolts with the van sitting on its wheels. A shifter that no longer lines up with the gear indicator after the job usually means the transmission mount was not fully seated before tightening.