Jeep Grand Cherokee Front Driveshaft 938-138 2007-2010

This is a complete front driveshaft assembly for the 2007-2010 Jeep Grand Cherokee (WK) and 2007-2010 Jeep Commander (XK). It replaces Mopar 52853432AA and cross-references to Dorman 938-138 and 65-3012.

Listed fitment: 2007-2010 Commander 3.7L, 4.7L and 5.7L with the NV140 transfer case (Quadra-Trac I); 2007-2008 Grand Cherokee 4.7L and 5.7L; and 2009-2010 Grand Cherokee 3.0L diesel, 3.7L, 4.7L, 5.7L and 6.1L SRT8 with Quadra-Trac I. Trucks with the two-speed Quadra-Trac II or Quadra-Drive II cases may use a different front shaft, so confirm your transfer case before you order.

The shaft is steel with a painted finish. The Quadra-Trac I system is full-time AWD, so the front shaft turns every mile the vehicle is driven. Common signs of a worn front shaft are a clunk or click on acceleration or when turning, a vibration that builds with speed, or grease sprayed around a torn joint boot.

To install, mark the flanges, remove the bolts at the transfer case output and front differential, and remove the shaft. Install the new one, torque the flange bolts to the factory spec, and check the front differential fluid level before the road test.