Jeep Grand Cherokee Rear Driveshaft 936-071 2005-2009

This is a complete rear driveshaft assembly that cross-references to Dorman 936-071 and Mopar 52105760AB, 52105760AC, 52105760AD, 52105760AE, 52105760AF, 52853436AB, 52853436AC and RL105760AF.

The supplier
fitment for the 2005-2009 Jeep Grand Cherokee (WK), 2006-2010 Jeep Commander (XK) and 2008-2012 Jeep Liberty with the automatic transmission in 4WD and AWD. Rear shafts on these trucks vary by transfer case and engine, so match the Mopar number stamped on your old shaft or run your VIN before you order.

The shaft is steel, dynamically balanced, and the slip yoke comes lubricated. Signs the old shaft is done: a clunk when you shift into drive or reverse, a buzz or vibration that builds with road speed, or play you can feel by twisting the U-joints by hand with the truck in park.

To replace, mark the pinion flange so the new shaft goes back in the same clocking, unbolt it at the rear axle, slide the yoke out of the transfer case, install the new shaft, and torque the flange bolts to factory spec. Top off the transfer case if any fluid ran out of the tailshaft.