Jeep Grand Cherokee Transfer Case Control Module 68395074AA

This transfer case control module (TCCM) replaces Mopar 68395074AA and the related 05150732AE, 5150732AC and 5150732AD numbers on 2014-2015 Jeep Grand Cherokee and Dodge Durango 4x4 models with the 2-speed transfer case. The listed fitment covers the Grand Cherokee 3.0L diesel, 3.6L, 5.7L and 6.4L and the Durango 3.6L and 5.7L. It uses the factory 4-pin and 16-pin connectors and the original mounting location.

The TCCM takes the 4WD selector input and drives the transfer case shift motor, so a failed module usually shows up as a Service 4WD message, a case that will not shift into 4LO or neutral, or selector lights that flash without the shift completing. Before replacing it, check the fuses, the connector pins for corrosion and the shift motor itself, and confirm the number on your old module label matches one of the numbers above.

Disconnect the battery, unplug and unbolt the old module and install the new one with the connectors fully latched. Reconnect power and clear codes. The supplier
it as a plug-in replacement with no programming; if the module sets a configuration code or the modes do not respond, run a proxi configuration with a scan tool, then verify 4HI, 4LO and neutral on level ground.