Front driveshaft for the 2005 Grand Cherokee 3.7L, 2006 Grand Cherokee SRT8 6.1L and 2006 Commander 3.7L. Replaces 52105758AB-AE and 938-126.
This is a complete front driveshaft assembly for the early WK Grand Cherokee and XK Commander. It replaces Mopar 52105758AB, 52105758AC, 52105758AD and 52105758AE, and cross-references to Dorman 938-126 and 65-3018.
Listed fitment is narrow: the 2005 Jeep Grand Cherokee with the 3.7L V6, the 2006 Grand Cherokee with the 6.1L (SRT8), and the 2006 Jeep Commander with the 3.7L V6. The 2007-2010 WK and XK use a different front shaft, and the 4.7L and 5.7L V8 trucks are not on the list, so match the Mopar number on your old shaft before you order.
The shaft is steel, dynamically balanced, and the slip section comes lubricated. Common reasons to replace it: a clunk on take-off or when shifting between drive and reverse, a vibration that grows with speed, or a U-joint with play you can feel by hand.
Install: support the vehicle, mark both flanges, unbolt the shaft at the front axle and the transfer case, fit the new one in the same orientation, and torque the bolts to factory spec.
| Replaces | 52105758AB, 52105758AC, 52105758AD, 52105758AE, 938-126, 65-3018 |
| Listed fitment | 2005 Grand Cherokee 3.7L; 2006 Grand Cherokee 6.1L; 2006 Commander 3.7L |
| Does not fit | 2007-2010 Grand Cherokee WK and Commander XK |
| Position | Front |
| Material | Steel |
| Shipping weight | 19.3 lb |
