Jeep Wrangler JK Transfer Case Shifter 52060062AG

This is the floor-mounted transfer case shifter assembly for the Jeep Wrangler JK: the lever, pivot housing and bracket that bolt to the floor and move the Command-Trac or Rock-Trac transfer case between 2H, 4H, N and 4L through the shift linkage. It replaces Mopar 52060062AD, 52060062AE, 52060062AF and 52060062AG.

Fitment is 2007-2011 Wrangler with the 3.8L V6 and 2012-2018 Wrangler JK with the 3.6L V6. Confirm your old part number on the housing before ordering.

JK owners usually replace this when the shifter gets sloppy, will not hold 4H or 4L, pops out of range, or the plastic housing cracks at the pivot and the lever flops in the console. To swap it, pull the shifter boot and center console trim, disconnect the linkage rod from the lever, unbolt the assembly from the floor, and install the new one in reverse. Recheck linkage adjustment afterward so each detent on the lever lines up with a detent in the case.