



Transfer case shift actuator for the 2003-2009 Lexus GX470 4.7L V8 4WD. Replaces Toyota 36410-60080, 36410-60081, 36410-60082 and 36410-60083.
This actuator fits the 2003-2009 Lexus GX470 with the 4.7L V8 and 4WD. It replaces Toyota 36410-60080, 36410-60081, 36410-60082 and 36410-60083, and crosses to SAT012. It is the single-rod unit. The 2003-2009 4Runner V8, the 2010-up 4Runner and the GX460 use a different, two-rod actuator (600-493), so check the rod count on your old part.
The actuator is the electric motor and gear set that moves the transfer case between high and low range. When it wears out, the low range or center diff lock light keeps flashing, and the transfer case either never finishes the shift or gets stuck in one range.
Before you replace it, check the connector for water and corrosion and make sure the fuse is good. On the bench, compare the rod position on the new actuator with the old one before you install it. The rod has to line up with the shift fork inside the case, or the actuator will not seat. The unit weighs about 3.7 lb.
| Fits | Lexus GX470 2003-2009, 4.7L V8, 4WD |
| Replaces | 36410-60080, 36410-60081, 36410-60082, 36410-60083, SAT012 |
| Shift rods | 1 |
| Weight | 3.69 lb |



