OEMTOOLS 25517 3-Piece Dead Blow Hammer Set (1/2, 1, 2 lb)

On a transmission bench you spend a lot of time tapping parts into place, and a steel hammer will mar a clutch drum, a sun shell, or a freshly installed seal in a heartbeat. A dead blow solves that. The steel shot inside the head kills the rebound, so the energy goes into the part instead of bouncing back at your hand, and the non-marring rubber face keeps aluminum and machined surfaces clean.

This OEMTOOLS set gives you three weights so you can match the hammer to the job: the 1/2 lb for seating seals and small bearings, the 1 lb for driver work and races, and the 2 lb when you need to persuade a drum or a stubborn snap ring seat. Non-slip rubber handles, non-spark heads, and one-piece bodies that will not fly apart under repeated use. Ships from the USA.