A 9-piece race and seal driver set that seats wheel bearings, races, and axle seals squarely without cocking or nicking them. Nine driver diameters from 1.565 to 3.180 inches cover most passenger and light-truck jobs, all in a fitted case.
When you drive a bearing race or a seal home with the wrong-size tool, it goes in crooked, mars the bore, or leaves a lip proud enough to weep. This 9-piece set gives you a matched driver for the job so pressure lands evenly on the outer edge and the part seats flat the first time.
The kit spans nine driver diameters from 1.565 in. up to 3.180 in., which covers the wheel bearings, races, and axle seals on most cars and light trucks. Each disc pairs with a single handle so you can tap parts in with a dead-blow or run them under a press. Everything stores in a labeled case so you are not hunting for the right size mid-job.
| Driver sizes | 9 pieces, 1.565 in. to 3.180 in. |
| For | Wheel bearings, races, axle seals |
| Action | Even pressure on the outer edge |
| Use | By hand with a mallet or under a press |
| Includes | Storage case and instructions |
| Ships from | USA |
