OEMTOOLS 87032 9-Gallon Rolling Oil Drain Caddy 32-62 in

This is the drain you roll under a car on a lift when you are dropping a transmission pan, not a flat catch pan you slide across the floor. The 17-inch funnel sits on a column that adjusts from 32 inches up to 62 inches, so you set the funnel right below the pan rail instead of watching ATF sheet off the crossmember on the way down. The 9-gallon translucent tank lets you see the level, so you know when it needs emptying before it comes back on the floor.

On a normal service the drop is 4 to 6 quarts out of the pan and another 5 to 7 if you are pushing the converter and cooler lines out, which is why a 2-gallon pan is not enough for a full exchange. The tank holds the whole job. A drain valve and evacuation spout are built in, so you dump it into your waste oil barrel without tipping the tank or funneling twice. It handles used ATF, motor oil, gear oil, and coolant catch the same way.

The built-in tool rack holds your pan bolts, extension, and 10mm or 13mm socket while you have both hands under the vehicle, and the heavy-duty casters roll loaded across a shop floor without fighting you. This is OEMTOOLS part number 87032.