OTC 4410 Master Bushing Driver Set - 33 Piece, Metric and SAE

A bushing is only as good as the tool that seats it. Drive one in cocked, or with a socket that is a hair too small, and you gall the bore or leave the bushing proud - and now you have a bigger problem than the worn part you started with. This OTC 4410 set is built to keep that from happening. You get 33 pieces covering bushings from 10mm to 42mm and 3/8 inch to 1-3/8 inch, with drivers sized to actually match the shoulder of the bushing so it goes in square and stops flush. Three steel handles - small, medium and large - let you match the driver to the working depth instead of fighting for clearance.

This is a general-purpose set, not a transmission-specific kit, and that is the point: the same drivers that seat a pump bushing or a case bushing on a transmission bench will handle control-arm bushings, shift-linkage bushings, tractor and equipment bushings, and electric-motor end-bell bushings. High-grade steel means the driver faces do not mushroom the first time you lean on them with a press or a dead-blow. Everything lives in a rugged blow-molded case so the size you need is there when you open the lid, not scattered across three drawers. If you already run a 52-piece disc set for seals and races, this is the harder-hitting companion for actual press-fit bushing work. Ships from the USA.