Extractor set with ten guide bushings, five left-hand drill bits and five extractors, for drilling a snapped pan or bellhousing bolt out dead center.
OTC 4651: ten guide bushings, five left-hand drill bits, five screw extractors and their extractor nuts, in a blow-molded case. The guide bushings are what separate this from a bargain easy-out kit. You seat the bushing over the broken fastener and the drill bit runs through it, so the hole starts on center and stays there instead of walking off into the aluminum.
On transmission work that is the whole job. A snapped pan bolt, a bellhousing bolt sheared off flush in the case, a stud broken in the tailhousing - drill off-center in a magnesium or aluminum case and you have turned a bolt job into a thread insert job, or a case replacement. Centered, the extractor bites and the remains back out.
The drill bits are left-hand, which does more work than people expect: turning counterclockwise, the bit itself often grabs a bolt that let go from torque rather than corrosion and spins it out before you ever reach for the extractor. Each extractor takes a nut so you can drive it with a wrench and keep steady, straight pressure. OTC covers the set with a limited lifetime warranty.
| Pieces | 25 |
| Includes | 10 guide bushings, 5 left-hand drill bits, 5 extractors with extractor nuts |
| Drill bits | Left-hand |
| Case | Blow-molded storage case |
| Weight | 1.4 lb |
| Part number | OTC 4651 |
| Warranty | Limited lifetime |
