OTC 528150 Eaton Fuller Lightning Transmission Jack Adapter

The OTC 528150 is a formed steel adapter plate that bolts onto the saddle of the OTC 5019A transmission jack. It is shaped to support the case of an Eaton Fuller Lightning series heavy truck transmission, so the box sits flat and locked on the jack instead of balancing on a generic cradle.

Lightning series boxes are heavy and top-heavy once the shift tower is on. Dropping or installing one on a flat jack head invites the transmission to roll as you back it off the input shaft or line it up with the clutch. A dedicated adapter keeps it square to the bellhousing so you can walk it in and out without fighting it or putting a hand where it does not belong.

Typical use: install the adapter on the 5019A, raise it up under the transmission, strap the case, then remove the bellhousing bolts and roll the unit straight back. Reverse the steps for install. The plate is high strength steel with a rust resistant coating for fleet shop duty.

This is an adapter only and requires the OTC 5019A transmission jack.