Drives press-in bushings in and out on cars, trucks, and tractors with 17 labeled adapters from 7/16 to 1-3/8 inch and three knurled drivers.
A bushing driver set that covers most of the small and medium press-in bushings you hit on domestic cars and light trucks. You pick the adapter that matches the bushing OD, seat it over the bushing, drop in the matching driver, and drive it out with a mallet. Reverse the process to press the new one in square. Every adapter and driver is stamped with its size, so you are not guessing which piece fits mid-job.
The kit runs 17 bushing adapters from 7/16 inch up to 1-3/8 inch, paired with three knurled-handle drivers (#1, #2, #3) for grip when you are swinging a hammer. It handles suspension bushings, control arm bushings, small seal and bearing races, and doubles for seating transmission filter neck seals and pan-area bushings on the bench. Also works on tractors and construction equipment where the bushing sizes stay in this range.
Everything stores in a molded case that keeps the adapters sorted by size. This is the general-purpose 641335 set (Powerbuilt model 641335, UPC 028907346090), the 23-piece configuration. For bushings larger than 1-3/8 inch you will want a heavier driver set; this one is built for the everyday small-to-medium work.
| Model | Powerbuilt 641335 |
| Pieces | 23-piece set (17 adapters, 3 drivers, case) |
| Adapter range | 7/16 in to 1-3/8 in |
| Drivers | Three knurled-handle drivers (#1, #2, #3) |
| Fits | Most domestic cars, light trucks, tractors, and construction equipment |
| Weight | 3.9 lb |
| Storage | Molded carrying case |
| Ships | From the USA |
