Front driveshaft for 2011-2016 Silverado and Sierra 2500HD/3500HD 4WD with the 6.0L or 6.6L and 1350 U-joints. Replaces GM 84016569 and 938-087.
This front driveshaft fits the 2011-2016 Chevrolet Silverado 2500HD and 3500HD and GMC Sierra 2500HD and 3500HD 4WD with the 6.0L gas V8 or the 6.6L Duramax. It replaces GM 84016569, 84005297 and 84170767, and crosses to Dorman 938-087 and 65-1017.
Check the U-joints on your old shaft before you order. This shaft is built for the 1350 heavy-duty joint with a 30.18 mm cap. It does not fit trucks that use the 1344 joint with a 28.5 mm cap, so measure a cap on the old shaft first.
On these HD trucks a worn front shaft joint causes a clunk when the front axle engages, a shudder in 4-high, or a knock you feel through the floor when you shift from reverse to drive. The shaft is 38.07 in. long end to end and has a 32-spline slip yoke. Mark the flanges before removal so the new shaft goes back in phase.
| Fits | 2011-2016 Chevrolet Silverado 2500HD/3500HD, GMC Sierra 2500HD/3500HD, 6.0L and 6.6L V8, 4WD |
| Position | Front |
| Replaces | 84016569, 84005297, 84170767, 938-087, 65-1017 |
| U-joint | 1350 (30.18 mm cap), not for 1344 |
| Length | 38.07 in. |
| Spline count | 32 |
| Weight | 16.96 lb |
