A 12-ton H-frame hydraulic shop press for pressing bearings, bushings, U-joints, and pilot bearings out of transmission and driveline parts.
This is a 12-ton H-frame hydraulic shop press built for the bearing, bushing, and U-joint work that comes up on nearly every transmission rebuild and driveline job. A hand-pump bottle jack drives the ram down through a 0-24 inch range, and the H-frame has eight hole positions on each upright so you can reposition the bed to match the part you are pressing - a short pinion bearing needs a different working height than a long transmission tailshaft bushing.
The press plates are solid steel and sit on an adjustable support beam, so you can press out input shaft bearings, countershaft bearings, U-joints, ball joints, wheel bearings, and bushings without needing a dedicated tool for each one. Return springs pull the ram back up between strokes. The frame is high-grade steel with a lead-free painted finish that resists shop oil and grease.
Rated capacity is 12 tons, stroke length is 6-7/8 inches, and bed opening is just over 3 inches, with a maximum working distance of 24 inches between the ram and the press bed. Shipped weight is right around 99 lb, so plan on bench assembly - this ships unassembled, not pre-welded.
| Max pressure | |
| Stroke length | |
| Bed opening | |
| Max working distance | |
| Product dimensions | |
| Item weight | |
| Included |
