Pressure plate, disc, release bearing and pilot bearing for the 1999-2005 Suzuki Grand Vitara and 2004 Vitara with the 2.5L V6 and a manual gearbox.
A complete clutch replacement set for the Suzuki Grand Vitara 2.5L V6 manual, 1999-2005, and the 2004 Vitara V6. It crosses to reference number 04-200.
In the box: the pressure plate (11.00 inches), a clutch disc (8.86 inches, 21 splines), the release bearing, the pilot bearing and a plastic alignment tool. Input shaft diameter is 1.14 inches. Lay the old disc next to the new one and count splines before the transmission goes back in.
These trucks usually come in for slipping under load in 4th and 5th, a high engagement point, or a chirp from the release bearing when the pedal is pressed. With the transfer case and transmission out, have the flywheel resurfaced or replaced if it shows hot spots, cracks or a glazed face, and check the rear main seal for oil before the new disc goes on.
Knock out the old pilot bearing, install the new one flush, lightly grease the input splines, center the disc with the tool and draw the pressure plate bolts down evenly in a star pattern.
| Reference numbers | 04-200 |
| Fits | 1999-2005 Suzuki Grand Vitara 2.5L V6; 2004 Suzuki Vitara 2.5L V6 (manual transmission) |
| Includes | Pressure plate, clutch disc, release bearing, pilot bearing, alignment tool |
| Pressure plate diameter | 11.00 in |
| Disc diameter | 8.86 in |
| Disc spline count | 21 |
| Input shaft diameter | 1.14 in |
