Bench-mount T-0156-A style fixture with a thicker support plate and two adjustable arms that hold a Ford or Chrysler transmission case for teardown.
This is a T-0156-A style transmission holding fixture with a heavier frame than the standard pattern. The main support plate is thicker, the bench base is wider, and the center shaft connection is extended and reinforced, all aimed at the same complaint: a fixture that flexes when a full case is hanging off it and you are leaning on a breaker bar.
Two steel mounting arms pivot independently, so they can be swung to line up with the bolt locations on different Ford and Chrysler transmission cases. Check the mounting points on your case against the arm travel before you order; this is a style-pattern fixture, not a case-specific adapter.
In use, you bolt the base to the bench, bolt the arms to the case with hardware suited to your case threads, and slide the center shaft into the base. The shaft lets you rotate the transmission to a different working angle and then lock it with the pin, so you can go from pulling the pump to dropping the valve body without lifting the unit back off the bench. Mounting bolts for your specific case are not included.
At 9.6 lb it is a bench fixture, not a rolling stand or a floor jack adapter.
| Pattern | |
| Application | |
| Arms | |
| Mount | |
| Weight |
