TEKTON 3-Piece Micrometer Torque Wrench Set

Most shops end up needing three torque ranges on a given job: inch-pounds for things like valve covers and intake manifolds, mid-range ft-lb for accessory brackets and smaller head bolts, and the higher range for wheel lugs, suspension, and larger fasteners. This set covers all three with a 1/4 inch drive wrench rated 20-200 in-lb, a 3/8 inch drive wrench rated 10-100 ft-lb, and a 1/2 inch drive wrench rated 40-300 ft-lb, so one set replaces reaching for a cheap combination wrench and guessing.

Each wrench is individually calibrated to within +/-3% in both clockwise and counterclockwise directions and ships with its own serialized certificate of calibration showing the actual test results, not just a spec sheet claim. The 90-tooth ratchet head keeps 9 teeth engaged with the gear at all times so it will not skip under load, and the 4-degree swing arc means less handle travel between clicks when you are working in a tight engine bay.

The torque scale is laser-marked directly into the satin-finished handle rather than printed or stickered, so it will not wear off with shop use. The adjustment collar locks into position to hold your setting and will not creep during a job. Includes a magnetic 1/4 inch hex bit holder, a 1/4 to 3/8 inch adapter, a 3/8 to 1/4 inch reducer, a 1/2 to 3/8 inch reducer, and a fitted case for each of the three wrenches.