Toyota Camry 2002-2006 2.4L Manual Trans Mount Kit 4-Piece

A four-piece mount set for the 2002-2006 Toyota Camry 2.4L four-cylinder with the manual transmission (Japan-built cars) and the 2004-2008 Camry Solara 2.4L. It includes the front engine mount, the manual transmission mount, and the front and rear engine torque strut mounts (solid). It crosses to A4226, A4283, A4203 and A4204 and replaces Toyota numbers including 12361-0H030, 12361-0H070, 12363-0H050 and 12364-0H010.

On the 2AZ-FE Camry the torque struts and the transmission mount take the hit every time the clutch engages. Once they sag you get a clunk on takeoff and on lift-throttle, a rough, shaky idle and a shifter that moves around under load. That shifter movement and clutch judder often get blamed on the clutch or the gearbox when the mounts are the real cause. Doing all four at once keeps the new mounts from being overloaded by an old one.

Manual transmission only. Check the mount layout against the ones on the car before you start.

On the job: support the engine from above or with a jack and a block of wood under the oil pan before any mount comes out. Change one mount at a time, leave the through-bolts snug until every mount in the set is in, then let the drivetrain settle at rest and torque everything. Tightening a mount while the engine is jacked sideways preloads the rubber, and a preloaded mount tears early.