FREE shipping over $100  •  Ships fast from the USA  •  Secure checkout  •  30-day returns
Home / Shop / Tools / 20-Gallon Air-Operated Waste Oil Drain Tank, 38-65in Adjustable
Tools

20-Gallon Air-Operated Waste Oil Drain Tank, 38-65in Adjustable

$126.99
In stock • ships from the USA • qualifies for FREE shipping

Rolling 20-gallon drain tank that catches a full ATF pan drop under a lift, then blows the waste oil out to your bulk drum on shop air.

Secure Stripe checkout • free shipping over $100 • 30-day returns
Secure Stripe checkout
Ships from the USA
30-day returns

About this product

This is the drain tank you roll under a car on the lift when you are dropping a transmission pan and do not want ten quarts of hot ATF on the floor. The 15-inch funnel sits on a column that adjusts from 38 to 65 inches, so it reaches up to a two-post lift at working height or drops down for a car on ramps. The tank holds 20 gallons, which is roughly ten pan drops before you have to empty it.

Emptying is where an air-operated tank beats a plain catch pan. Hook shop air to the inlet, and the tank pressurizes and pushes its contents out through the 5 ft 9 in reinforced discharge hose into your waste drum or bulk tank. You never lift a full container or pour by hand. The hose is rated for continuous service at 120 C, so it handles ATF and gear oil coming out of a transmission that was just driven in, not just cold drain oil.

The body is powder-coated steel. It rides on four wheels, two 4.5-inch rigid and two 2.76-inch swivel casters, so it tracks straight when you push it across the bay but still spins into position under a pan. Use it for automatic transmission fluid, gear oil, engine oil, coolant, and diesel fuel drain-downs.


Specifications

Capacity
Funnel height
Funnel diameter
Discharge hose
Operation
Material
Wheels

20-Gallon Air-Operated Waste Oil Drain Tank, 38-65in Adjustable

$126.99
In stock • ships from the USA • FREE shipping • 30-day returns

Related products
30pc 2-in-1 Bearing Puller & Housing Removal Kit, Slide Hammer
Tools
30pc 2-in-1 Bearing Puller & Housing Removal Kit, Slide Hammer
$113.99
View
4L60E / 700R4 Rebuild Tool Kit, 7-Piece Pro Set
Tools
4L60E / 700R4 Rebuild Tool Kit, 7-Piece Pro Set
4L60E4L65E4L70E
$149.99
View
T-0156-A Ford C4/C6/AOD & Chrysler Transmission Holding Fixture
Tools
T-0156-A Ford C4/C6/AOD & Chrysler Transmission Holding Fixture
4R70WAOD42RE/44RE
$83.99
View
SST-1055 GM Oil Pump Body Remover & End Play Checking Tool, Replaces J-24773-A / T-1055
Tools
SST-1055 GM Oil Pump Body Remover & End Play Checking Tool, Replaces J-24773-A / T-1055
4L60E700R4TH350
$40.99
View