VEVOR SBC90 25-Gallon Benchtop Sandblasting Cabinet

A benchtop abrasive blast cabinet earns its keep on a transmission bench. Aluminum cases, valve bodies, pump housings, servo bores and hard parts come out of a core covered in varnish, scale and old gasket material, and blasting is the fastest way to get them back to clean bare metal before inspection and reassembly. This VEVOR SBC90 gives you a contained 25-gallon cabinet so the media and dust stay inside instead of all over the shop.

The body is cold-rolled steel with a powder-coated finish to hold up to abrasive and shop chemicals. A clear acrylic window and a built-in LED tube light let you actually see the part you are working, and it ships with four replaceable lens protectors so grit does not fog the window right away. Built-in gloves let you turn and position parts under the gun.

It runs on 40-120 PSI at about 5 CFM and holds up to roughly 33 lbs of media, so it will keep up with a small single-stage compressor for hobby and light shop work. The kit includes the handheld blast gun and four ceramic nozzles (4.5, 5, 6 and 7 mm) that outlast steel nozzles, and it works with glass bead, aluminum oxide or silica sand depending on how aggressive you need to be. Plan on adding an inline air/water separator and a shop-vac or dust collector on the exhaust port to keep dust down and media dry - both make a real difference in how cleanly it runs.

Cabinet capacity 25 gallon, model SBC90, assembled weight about 33 lbs. Sealant and seal tape are included to close up the panel seams during assembly.