Valve body (1993-1994): First-design VB: 4 VB solenoids, early EPC, PWM 3-2 control solenoid (metal, white, 10-15 ohm), no PWM TCC solenoid (TCC on/off only), non-vented manual valve, casting bottom has open port over 3-2 valve, no vent at manual valve.
Solenoids (1993-2002): Early-style EPC (pressure control) solenoid (Sonnax: '92-'02).
Solenoids (1993-1994): TCC on/off solenoid only (no PWM TCC). 3-2 control solenoid is PWM (metal, white, 10-15 ohm).
Internal harness (1993-1994): Internal harness for on/off TCC + PWM 3-2, no PWM TCC circuit.
Pump (1993-1994): 10-vane rotor/slide; body casting and worm track same as 1985-93 700-R4; cover has larger filter seal bore than 700-R4. 298mm.
Drums and shells (1993-1997): 298mm input (turbine) shaft, no reluctor, all applications.
Drums and shells (1993-2006): Rear planetary thrust bearing .140 in ('06-earlier); .160 in from 2007 (Sonnax 77731-09 / 77731-10).
Pan and filter (1993-1996): Shallow pan, shallow filter (OEM 8681082).

Build the 1993 4L60E kit 1994 4L60E parts list Every 4L60E year

FAQ

What parts are year-specific on a 1993 4L60E?

On a 1993 4L60E these parts are year-specific: valve body, solenoids, internal harness, pump, drums and shells, pan and filter. Every part listed above is confirmed for 1993, so you can order from this list with confidence.

Can I order only some of the 1993 4L60E parts?

Yes. The 1993 4L60E kit builder lets you tick only the parts you need, and they go into one cart.

1993 4L60E Rebuild Parts List: Every Part That Fits

Rebuild and Overhaul Kits

Clutch Frictions, Steels and Modules

Valve Body

Solenoids

Internal Wiring Harness

Pump and Pump Parts

Bands

Sprags and Roller Clutches

Drums, Housings, Shells and Planetaries

Pistons, Servos and Accumulators

Bearings and Thrust Washers

Shift Kits

What changed for 1993

FAQ

What parts are year-specific on a 1993 4L60E?

Can I order only some of the 1993 4L60E parts?

Sources