1993 4L60E Master Kit Builder
Build your own 1993 4L60E rebuild kit. Every part below is checked to fit a 1993 4L60E, so the valve body, solenoids and kits match your year. Most parts come in two choices: Regular (direct replacement) or Upgrade (heavy-duty or performance). Pick only what your job needs and skip the rest.
1 Tick the parts you need2 Your total updates at the bottom3 Click Add selected to cart and check out once
Rebuild and Overhaul Kits
Rebuild / overhaul kit pick one
Regular
Verified for 1993 • fits 1993-2003
$55.99
Clutch Frictions, Steels and Modules
Clutch module (frictions and steels) pick one
$83.99
Steel plates
Friction plates
Valve Body
Valve body pick one
$295.00
Solenoids
Solenoid kit pick one
$84.99
Shift solenoids A and B
TCC lock-up solenoid
Regular
Verified for 1993 • fits 1993-2013
$31.99
Internal Wiring Harness
Internal wiring harness
Pump and Pump Parts
Pump rotor and vane kit
Pump
Bands
Band
$50.99
Sprags and Roller Clutches
Sprag / one-way clutch
Drums, Housings, Shells and Planetaries
Planetary carrier
Reaction sun shell
Upgrade
Verified for 1993 • fits 1993-2013
$74.99
Pistons, Servos and Accumulators
Corvette 2-4 servo
Regular
Verified for 1993 • fits 1993-2013
$69.89
Pistons and accumulators
Bearings and Thrust Washers
Thrust bearings
$45.99
Shift Kits
Shift kit pick one
1993 4L60E year notes for techs
- Valve body (1993-1994): First-design VB: 4 VB solenoids, early EPC, PWM 3-2 control solenoid (metal, white, 10-15 ohm), no PWM TCC solenoid (TCC on/off only), non-vented manual valve, casting bottom has open port over 3-2 valve, no vent at manual valve. (source)
- Solenoids (1993-2002): Early-style EPC (pressure control) solenoid (Sonnax: '92-'02). (source)
- Solenoids (1993-1994): TCC on/off solenoid only (no PWM TCC). 3-2 control solenoid is PWM (metal, white, 10-15 ohm). (source)
- Internal harness (1993-1994): Internal harness for on/off TCC + PWM 3-2, no PWM TCC circuit. (source)
- Pump (1993-1994): 10-vane rotor/slide; body casting and worm track same as 1985-93 700-R4; cover has larger filter seal bore than 700-R4. 298mm. (source)
- Drums and shells (1993-1997): 298mm input (turbine) shaft, no reluctor, all applications. (source)
- Drums and shells (1993-2006): Rear planetary thrust bearing .140 in ('06-earlier); .160 in from 2007 (Sonnax 77731-09 / 77731-10). (source)
- Pan and filter (1993-1996): Shallow pan, shallow filter (OEM 8681082). (source)