2006 4L60E Master Kit Builder
Build your own 2006 4L60E rebuild kit. Every part below is checked to fit a 2006 4L60E, so the valve body, solenoids and kits match your year. Most parts come in two choices: Regular (direct replacement) or Upgrade (heavy-duty or performance). Pick only what your job needs and skip the rest.
1 Tick the parts you need2 Your total updates at the bottom3 Click Add selected to cart and check out once
Rebuild and Overhaul Kits
Rebuild / overhaul kit pick one
Upgrade
Verified for 2006 • fits 2004-2013
$288.99
Clutch Frictions, Steels and Modules
Clutch module (frictions and steels)
Steel plates
Friction plates
Valve Body
Valve body pick one
$228.99
Separator Plate and Valve Body Gaskets
Separator plate
Upgrade
Verified for 2006 • fits 1996-2006
$51.99
Solenoids
Solenoid kit pick one
Pressure control (EPC) solenoid pick one
Shift solenoids A and B
TCC lock-up solenoid
Regular
Verified for 2006 • fits 1993-2013
$31.99
Internal Wiring Harness
Internal harness with TCC solenoid
Regular
Verified for 2006 • fits 2003-2006
$84.99
Internal wiring harness pick one
$66.99
Pump and Pump Parts
Pump rotor and vane kit
Pump pick one
Bands
Band
$50.99
Sprags and Roller Clutches
Sprag / one-way clutch
Drums, Housings, Shells and Planetaries
Planetary carrier pick one
Reaction sun shell
Upgrade
Verified for 2006 • fits 1993-2013
$74.99
Pistons, Servos and Accumulators
Corvette 2-4 servo
Regular
Verified for 2006 • fits 1993-2013
$69.89
Pistons and accumulators pick one
Bearings and Thrust Washers
Thrust bearings
$45.99
Shift Kits
Shift kit pick one
$274.99
Filter, Pan and Pan Gaskets
Transmission pan pick one
Regular
Verified for 2006 • fits 1998-2013
$64.99
$143.99
2006 4L60E year notes for techs
- Valve body (2003-2008): Late-style EPC solenoid ('03-later), ON/OFF 3-2, PWM TCC, annular TCC exhaust ports, pressure switch manifold still used. (source)
- Separator plate (2001-2008): VB casting changed for MY2001 and the spacer-plate ID code went to three digits from 2001. (source)
- Solenoids (2003-2013): Late-style EPC solenoid ('03-later); early EPC fits only with Sonnax 34435-01K harness adapter. (source)
- Solenoids (1997-2008): '97-later PWM TCC solenoid snout (Sonnax 77942-02K, anti-drainback). (source)
- Internal harness (2006-2008): New internal harness and pass-through connector to add the ISS (OEM 24234121, 2006-up w/ ISS). (source)
- Pump (2006-2013): ISS-machined pump cover from MY2006 (phase-in); non-ISS models must use the ISS hole plug or the converter will not charge. (source)
- Drums and shells (1999-2013): Captured front planetary bearing (.199 in, black) '99-later. (source)
- Drums and shells (2006-2013): ISS input shaft: 15 reluctor teeth, sealing-ring grooves moved about 0.190 in inboard (phased in 2005-2006). (source)