1998 4L60E Master Kit Builder
Build your own 1998 4L60E rebuild kit. Every part below is checked to fit a 1998 4L60E, so the valve body, solenoids and kits match your year. Most parts come in two choices: Regular (direct replacement) or Upgrade (heavy-duty or performance). Pick only what your job needs and skip the rest.
1 Tick the parts you need2 Your total updates at the bottom3 Click Add selected to cart and check out once
Rebuild and Overhaul Kits
Rebuild / overhaul kit pick one
Regular
Verified for 1998 • fits 1993-2003
$55.99
$194.99
Clutch Frictions, Steels and Modules
Clutch module (frictions and steels) pick one
$83.99
Steel plates
Friction plates
Valve Body
Valve body
$295.00
Separator Plate and Valve Body Gaskets
Separator plate
Upgrade
Verified for 1998 • fits 1996-2006
$51.99
Solenoids
Solenoid kit pick one
$65.99
Pressure control (EPC) solenoid
Shift solenoids A and B
TCC lock-up solenoid
Regular
Verified for 1998 • fits 1993-2013
$31.99
Internal Wiring Harness
Internal wiring harness
Pump and Pump Parts
Pump rotor and vane kit
Pump pick one
Bands
Band
$50.99
Sprags and Roller Clutches
Sprag / one-way clutch
Drums, Housings, Shells and Planetaries
Planetary carrier
Reaction sun shell
Upgrade
Verified for 1998 • fits 1993-2013
$74.99
Drum or housing
Pistons, Servos and Accumulators
Corvette 2-4 servo
Regular
Verified for 1998 • fits 1993-2013
$69.89
Pistons and accumulators pick one
Bearings and Thrust Washers
Thrust bearings
$45.99
Shift Kits
Shift kit pick one
$274.99
Filter, Pan and Pan Gaskets
Transmission pan pick one
Regular
Verified for 1998 • fits 1998-2013
$64.99
$143.99
Switches and Sensors
Switch or sensor
Regular
Verified for 1998 • fits 1995-2003
$31.99
1998 4L60E year notes for techs
- Valve body (1996-2000): 5 solenoids; 3-2 control solenoid becomes ON/OFF (plastic, white, 20-31 ohm) (source)
- Solenoids (1993-2002): Early-style EPC (pressure control) solenoid (Sonnax: '92-'02). (source)
- Solenoids (1997-2008): '97-later PWM TCC solenoid snout (Sonnax 77942-02K, anti-drainback). (source)
- Pump (1997-2005): 13-vane rotor/slide with longer porting slots, '13 V' cast on cover back, same worm track as PWM pump. (source)
- Drums and shells (1993-2006): Rear planetary thrust bearing .140 in ('06-earlier); .160 in from 2007 (Sonnax 77731-09 / 77731-10). (source)
- Overhaul kits (1993-2003): Common early overhaul kit with piston lip seals (e.g. Precision KP33900EF, TransTec 1993-2003). (source)
- Overhaul kits (1997-2003): Same-era kit sold without piston lip seals for 1997+ molded rubber pistons (Precision KP33900G). (source)