Valve body (2009-2013): 2009 redesign: 3-2 downshift solenoid, valve and spring removed; casting cast shut at old 3-2 solenoid location; no pressure-switch bore (PSM eliminated, IMS used).
Separator plate (2009-2013): 2009+ plate: 3-2 downshift holes removed; gaskets molded to both sides (bonded); two snap-in screens replaced by three flat screens molded into the gaskets.
Solenoids (2003-2013): Late-style EPC solenoid ('03-later); early EPC fits only with Sonnax 34435-01K harness adapter.
Solenoids (2009-2013): 3-2 downshift solenoid deleted; remaining EPC, shift A/B, TCC on/off, PWM TCC.
Internal harness (2009-2013): IMS harness: TFT sensor moved into the new internal harness; case connector pin functions changed for IMS (e.g. 24237980, Rostra 74425V 2009-up).
Pump (2006-2013): ISS-machined pump cover from MY2006 (phase-in); non-ISS models must use the ISS hole plug or the converter will not charge.
Drums and shells (1999-2013): Captured front planetary bearing (.199 in, black) '99-later.
Drums and shells (2006-2013): ISS input shaft: 15 reluctor teeth, sealing-ring grooves moved about 0.190 in inboard (phased in 2005-2006).

Build the 2013 4L60E kit 2012 4L60E parts list Every 4L60E year

FAQ

What parts are year-specific on a 2013 4L60E?

On a 2013 4L60E these parts are year-specific: valve body, separator plate, solenoids, internal harness, pump, drums and shells. Every part listed above is confirmed for 2013, so you can order from this list with confidence.

Can I order only some of the 2013 4L60E parts?

Yes. The 2013 4L60E kit builder lets you tick only the parts you need, and they go into one cart.

2013 4L60E Rebuild Parts List: Every Part That Fits

Rebuild and Overhaul Kits

Clutch Frictions, Steels and Modules

Separator Plate and Valve Body Gaskets

Solenoids

Pump and Pump Parts

Bands

Sprags and Roller Clutches

Drums, Housings, Shells and Planetaries

Pistons, Servos and Accumulators

Bearings and Thrust Washers

Shift Kits

Filter, Pan and Pan Gaskets

What changed for 2013

FAQ

What parts are year-specific on a 2013 4L60E?

Can I order only some of the 2013 4L60E parts?

Sources